Sansui 5000 5000A 5000x F-6013 Driver boards
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Sansui 5000 5000A 5000x F-6013 Driver boards
Just had some Sansui F-6013 Driver boards manufactured. They turned out excellent. I plan on offering them bare with no components ($25 a pair) and fully populated ($100 a pair) keep in mind that there are $70 worth of NOS transistors on a pair of boards so....
They are going through testing right now.
You will have to use the F-6013 upgrade procedure Service Bulletin CE-037A for your receiver so they get hooked up correctly. I have a copy which I will supply with the boards. You must be versed in electronics or you will have problems installing.
They are going through testing right now.
You will have to use the F-6013 upgrade procedure Service Bulletin CE-037A for your receiver so they get hooked up correctly. I have a copy which I will supply with the boards. You must be versed in electronics or you will have problems installing.
-
- vinyl engineer
- Posts: 20346
- Joined: 01 Nov 2013 05:27
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
Thanks for offering those, bonzoro...I see a lot of these 5000 series amplifiers out there and it's not sure how many of them still have the old boards...I was fortunate in that my 5000a had the F-6013's installed...

I really can't enough of it, either! Love everything about this series of receivers! 8)


While I don't need any, hopefully some of our members here can benefit from your boards, especially if they find one of these receivers in less-than-stellar condition...Keep up the good work! =D>
I really can't enough of it, either! Love everything about this series of receivers! 8)
While I don't need any, hopefully some of our members here can benefit from your boards, especially if they find one of these receivers in less-than-stellar condition...Keep up the good work! =D>
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I have a 5000A (in pretty nice shape) and a set of the original F-6013 boards which I have not had time to install. I may put it up for sale with the originals. Maybe I'll throw in a set of new boards too....
-
- vinyl engineer
- Posts: 20346
- Joined: 01 Nov 2013 05:27
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
If you do decide to sell the Sansui, sell it here in our Classified section...I know there a lot of newbies to the vinyl community that need a decent amp or receiver and the Sansui would make as good a start as any! Even a seasoned collector can appreciate this series...And really, when has Sansui ever made a BAD receiver??? :-k
From the 2000-5000 series to the 5050-9090 series to the G series to the 331-881 series to the AU- series of amps and more, they all have value and worth in my mind and are DEFINITELY NOT throwaway electronics, despite what my local Craigslist idiot wants us to believe!

Too bad he's not as smart as WE are here! :wink:
We even have our own dedicated thread to the brand! =D>
https://www.vinylengine.com/turntable_f ... 85&t=79241
If you've got any of your own Sansui stuff to share, bonzoro, feel free to show it off there! :D
From the 2000-5000 series to the 5050-9090 series to the G series to the 331-881 series to the AU- series of amps and more, they all have value and worth in my mind and are DEFINITELY NOT throwaway electronics, despite what my local Craigslist idiot wants us to believe!
Too bad he's not as smart as WE are here! :wink:
We even have our own dedicated thread to the brand! =D>
https://www.vinylengine.com/turntable_f ... 85&t=79241
If you've got any of your own Sansui stuff to share, bonzoro, feel free to show it off there! :D
Last edited by vinyl master on 09 May 2018 04:02, edited 1 time in total.
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I can do that. I have been concentrating on my hand built Amplifiers/Preamp and have no time for the receivers.
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I've been busy soldering. The last couple parts will be here tomorrow.
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
Boards are finished, I stuck a pair up on the bay to gauge interest. The price rose pretty quick. Must be a few 5000's out there needing them.
-
- Posts: 1
- Joined: 02 Jan 2015 22:16
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I just purchased a pair. Very good quality!
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
Thanks Tom.
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I have boards with original transistors, and boards with TO-220 transistors. It drops the price down with the TO-220 chips installed
The TO-220 boards are $99 shipped
The TO-220 boards are $99 shipped
-
- junior member
- Posts: 7
- Joined: 19 Feb 2011 05:00
- Location: San Diego
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
Hi, are these boards still available for sale?
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I'll look to see if I have another set. Get back to you asap
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
I have another set here ready to go. PM me
-
- member
- Posts: 33
- Joined: 09 Jun 2015 21:04
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
got 2 pairs left.
-
- Posts: 1
- Joined: 27 Mar 2019 20:03
Re: Sansui 5000 5000A 5000x F-6013 Driver boards
Good Day Sir - Would you still happen to have a pair of these F-6013 driver boards available?