Hello,
since I have a bad english, I work with the google translator. Besides, I do not know if I am right here, so I ask for leniency.
I'm looking for a service manual for a Sony TTS 6000th He has problems with the speed.
Maybe someone can help here?
greeting
Heinz-Werner
Record Player Sony TTS 6000
-
- vinyl addict
- Posts: 7742
- Joined: 05 Aug 2004 07:51
- Location: CT, US
Re: Record Player Sony TTS 6000
Perhaps the TTS 8000 service manual will help guide you in troubleshooting the 6000. I'm thinking the only difference with the drive system is pitch adjustability on the 8000.
Service manual for the 8000 is here:
https://www.vinylengine.com/library/Sony/tts-8000.shtml
On page 4 of 17, Sony describes a "magnetic coating surface", carefully examine the magnetic coating on the side of the platter and be careful NOT TO DAMAGE / DEMAGNITIZE the strip. If you see any signs of damage, that may be the cause of your speed problem.
Page 7 of 17 shows where turntable speed adjustment is found.
Good luck and welcome to VE..... :)
Fred
Service manual for the 8000 is here:
https://www.vinylengine.com/library/Sony/tts-8000.shtml
On page 4 of 17, Sony describes a "magnetic coating surface", carefully examine the magnetic coating on the side of the platter and be careful NOT TO DAMAGE / DEMAGNITIZE the strip. If you see any signs of damage, that may be the cause of your speed problem.
Page 7 of 17 shows where turntable speed adjustment is found.
Good luck and welcome to VE..... :)
Fred
-
- Posts: 2
- Joined: 06 Feb 2017 15:26
Re: Record Player Sony TTS 6000
Thanks for Deina Answer Fred,
We already have the TTS8000 service manual. Unfortunately, you can not use it for the repair of the TTS6000. The 6000 has other boards and no pich control. It has only one switch for 33/45. In order to set it correctly, the correct voltages must be set on the potentiometers. This is not possible without the exact information.
This I have again created with the translator, since my English is not good.
greeting
Heinz-Werner
We already have the TTS8000 service manual. Unfortunately, you can not use it for the repair of the TTS6000. The 6000 has other boards and no pich control. It has only one switch for 33/45. In order to set it correctly, the correct voltages must be set on the potentiometers. This is not possible without the exact information.
This I have again created with the translator, since my English is not good.
greeting
Heinz-Werner