Michell Tecnoarm Cue Lever

a space odyssey
Post Reply
ntranced2
Posts: 3
Joined: 24 Jan 2017 03:51

Michell Tecnoarm Cue Lever

Post by ntranced2 » 29 Jan 2017 19:30

Just installed tecnoarm on a new gyrodec, all fine for the first couple of days but now my cue lever will raise the arm up but when I move the cue lever down the arm rest stays in position. I have to physically push it down.

Is this a common problem or does anyone have a remedy? Somewhat new to all this, previously had a project debut carbon so not exactly experienced with all these cmplex moving parts!

Baptist999
member
member
Great Britain
Posts: 87
Joined: 18 Sep 2007 03:48
Location: Cornwall!

Re: Michell Tecnoarm Cue Lever

Post by Baptist999 » 08 Feb 2017 09:02

About three or four years ago I bought my Gyrodec SE with a three point mounted Technoarm from my local Hi-Fi Emporium.

I quickly found that the cue lever initially lowers the arm VERY slowly initially at the start of a listening session.
After listening to the first side,subsequent movement is quicker...
Consequently I try and remember to leave the cue lever in the lowered position when the arm is "parked".

A little silicon lubrication spray on the cue arm piston did help, however the initial cue lowering is still rather slow..

Post Reply