the home of the turntable

Michell Gyrodec - motor

a space odyssey

Michell Gyrodec - motor

Postby vanko21 » 06 Feb 2016 18:37

Hello I have a question;
What should I do on my Michell Gyrodec
I want to put out the bike outside but do not know what to do?
Ask for a little Help.
vanko21
junior member
junior member
 
Posts: 13
Joined: 05 Nov 2014 12:27

Bulgaria

Re: Michell Gyrodec - motor

Postby vanko21 » 06 Feb 2016 18:43

ob_housing_kit.jpg
ob_housing_kit.jpg (4.75 KiB) Viewed 1446 times
Maybe something - http://www.amazon.co.uk/Michell-Enginee ... B00AQEQUBS
vanko21
junior member
junior member
 
Posts: 13
Joined: 05 Nov 2014 12:27

Bulgaria

Re: Michell Gyrodec - motor

Postby GyroSE » 07 Feb 2016 16:22

Is the motor broken since you want to remove it out of the housing?
GyroSE
member
member
 
Posts: 191
Images: 2
Joined: 25 Apr 2012 09:57

Sweden

Re: Michell Gyrodec - motor

Postby vanko21 » 10 Feb 2016 07:20

Motor running.
But I want to rig two TONARM.
vanko21
junior member
junior member
 
Posts: 13
Joined: 05 Nov 2014 12:27

Bulgaria

Re: Michell Gyrodec - motor

Postby Werner » 10 Feb 2016 07:24

Werner
long player
long player
contributor
 
Posts: 1340
Images: 90
Joined: 31 May 2002 00:00
Location: Antwerpen

Belgium

Re: Michell Gyrodec - motor

Postby Mikemaxcel_Milano » 13 Jul 2016 20:27

I have a Michell Orbe driving with a Chinese made DC motor with 1 mm diameter belt.
The belt given very little pulling force to the bearing which should be an advantage to minimize noise and side wear.
Attachments
FFYX MA11_DC Motor.jpg
Mikemaxcel_Milano
junior member
junior member
 
Posts: 11
Joined: 23 Feb 2008 18:45
Location: Milano

Re: Michell Gyrodec - motor

Postby Gotcha man » 05 Jan 2017 22:21

Will Michell Engineering do the tap for an owner?
Gotcha man
junior member
junior member
 
Posts: 9
Joined: 01 Jul 2013 09:16

Re: Michell Gyrodec - motor

Postby watchnerd » 15 Jan 2017 06:58

Mikemaxcel_Milano wrote:I have a Michell Orbe driving with a Chinese made DC motor with 1 mm diameter belt.
The belt given very little pulling force to the bearing which should be an advantage to minimize noise and side wear.


Is your Chinese motor still working for you?

I need a motor and don't really want to pay $900 for such a simple thing.
watchnerd
senior member
senior member
 
Posts: 318
Images: 4
Joined: 11 May 2014 19:09
Location: Seattle

United States of America

Re: Michell Gyrodec - motor

Postby Mikemaxcel_Milano » 30 Dec 2017 17:52

It`s working fine.
Attachments
Michell Orbe_FFYX Drive Motor B.jpg
Mikemaxcel_Milano
junior member
junior member
 
Posts: 11
Joined: 23 Feb 2008 18:45
Location: Milano

Re: Michell Gyrodec - motor

Postby blakep » 01 Jan 2018 01:16

Mikemaxcel_Milano wrote:I have a Michell Orbe driving with a Chinese made DC motor with 1 mm diameter belt.
The belt given very little pulling force to the bearing which should be an advantage to minimize noise and side wear.


Would you mind telling where you sourced the motor? Thanks.

Good luck with the 2nd arm.

As Gotcha Man and Werner pointed out, you will need to drill out the subchassis rear left so that a 2nd arm can be mounted there. My Gyro dates to the early 80's and the subchassis came predrilled for a 2nd armboard at that time.

Image
blakep
senior member
senior member
 
Posts: 624
Images: 14
Joined: 06 Nov 2006 03:01

Re: Michell Gyrodec - motor

Postby paskal » 21 Jan 2018 13:31

al mio motore si รจ bruciato il condensatore ceramico sul piccolo interruttore verde :( ,qualcuno sa il valore? non sono riuscito a misurarlo con il tester. Grazie a chi mi aiuta
paskal
 
Posts: 2
Joined: 08 Feb 2016 17:10

Italy

Return to Michell