Removal of Systemdek pulley

roman around
Post Reply
Winther666
Posts: 3
Joined: 10 Oct 2013 15:34

Removal of Systemdek pulley

Post by Winther666 » 29 Nov 2018 15:49

Hi

Short question
How do I remove the Pulley from the motor?

Cheers

cabbie01
Posts: 1
Joined: 13 Mar 2018 22:52

Re: Removal of Systemdek pulley

Post by cabbie01 » 01 Dec 2018 20:16

I have systemdek 11x and the pulley is an interference fit so a firm tug is all that's needed.

Dneprrider
member
member
Posts: 53
Joined: 26 Feb 2012 01:13

Re: Removal of Systemdek pulley

Post by Dneprrider » 03 Dec 2018 01:42

To do this I made a pulley puller using some bits I had around. I had to buy a small tap to thread the hole for the socket screw. It worked great and is was well worth it. I did not want to damage the motor or shaft by accident when trying to remove a really tight fitting pulley.

Have a look here to get an idea of what they look like.

http://lpturntables.blogspot.com/2012/0 ... afely.html

abril
long player
long player
Georgia
Posts: 2536
Joined: 13 Oct 2002 20:48
Location: Republic of Georgia/Cornwall

Re: Removal of Systemdek pulley

Post by abril » 03 Dec 2018 10:30

Plastic pulleys usually come off very easily(unless glued).metal ones not so easy.

Alec124c41
vinyl engineer
vinyl engineer
Canada
Posts: 23140
Joined: 28 Oct 2002 03:24
Location: North of Toronto, Canada

Re: Removal of Systemdek pulley

Post by Alec124c41 » 04 Dec 2018 17:13

Metal pulleys often have a grub screw holding them in place.

Cheers,
Alec

Post Reply