Clearing a skip with a wet toothpick

how clean is your house
Post Reply
derspankster
long player
long player
United States of America
Posts: 1433
Joined: 25 Feb 2013 18:03
Location: Ohio

Clearing a skip with a wet toothpick

Post by derspankster » 17 Jan 2019 20:17

marsalis.jpg
(16.47 KiB) Downloaded 148 times
I own a nice copy of Marsalis Standard Time - Wynton Marsalis (Columbia FC 40461) that I bought used locally some time back. It sounded great except for an annoying skip on side 2 that has kept me from even playing it. I recently read a post on one of the forums about cleaning ticks and pops with a wet toothpick. I decided to endeavor to find and remove the offending deeply embedded dirt or foreign substance that was causing the record to skip. Previous cleanings with my Spin Clean failed to dislodge the offending substance. Carbon fiber brushes did nothing.

I was able to locate the problem with the Help of magnifying glass. I wet the end of a pointed toothpick and gently scraped the record surface with the toothpick at about a 45 degree angle.

To my delight the speck popped right out immediately and the pop and skip is gone. Frankly, when I first read about this technique I was skeptical. I'm not sure it would work every time but I sure had success the first time.

der

derspankster
long player
long player
United States of America
Posts: 1433
Joined: 25 Feb 2013 18:03
Location: Ohio

Re: Clearing a skip with a wet toothpick

Post by derspankster » 17 Jan 2019 20:38

I need to add that I followed the grooves as closely as I could and in the playing direction (clockwise) I didn't press hard at all and it took just one short pass. I actually saw it pop out with magnification.

dysmike
member
member
Germany
Posts: 222
Joined: 21 Jul 2018 01:20

Re: Clearing a skip with a wet toothpick

Post by dysmike » 17 Jan 2019 21:52

Very cool, I have an otherwise rather minty album with a single skip.. in the last 4 seconds of the final song. I'll have to try this.

derspankster
long player
long player
United States of America
Posts: 1433
Joined: 25 Feb 2013 18:03
Location: Ohio

Re: Clearing a skip with a wet toothpick

Post by derspankster » 17 Jan 2019 22:04

I had what I considered an unplayable disk so I decided to take the chance. Hope it works out for you dysmike. Let us know.

Pauw
senior member
senior member
Netherlands
Posts: 317
Joined: 01 Jun 2018 13:09
Location: Spinning round and round somewhere.

Re: Clearing a skip with a wet toothpick

Post by Pauw » 17 Jan 2019 22:36

I'm impressed.....it is often a surprisingly small and simple thing that will cause a skip. The big thing is find it and then remove it but this sounds good to me. :D

Spinner45
long player
long player
United States of America
Posts: 2741
Joined: 01 Mar 2017 18:21

Re: Clearing a skip with a wet toothpick

Post by Spinner45 » 17 Jan 2019 22:42

wrote:
17 Jan 2019 22:03
derspankster wrote:
17 Jan 2019 20:38
I need to add that I followed the grooves as closely as I could and in the playing direction (clockwise) I didn't press hard at all and it took just one short pass. I actually saw it pop out with magnification.
From here on in I'm abandoning my using a wire brush with perpendicular strokes. This looks to be a lot better. :)
But but, the wire brush is the only thing that can DEEP clean those grooves!
Except for, what I use, a sand blaster.

derspankster
long player
long player
United States of America
Posts: 1433
Joined: 25 Feb 2013 18:03
Location: Ohio

Re: Clearing a skip with a wet toothpick

Post by derspankster » 17 Jan 2019 22:52

wrote:
17 Jan 2019 22:50
Spinner45 wrote:
17 Jan 2019 22:42
wrote:
17 Jan 2019 22:03

From here on in I'm abandoning my using a wire brush with perpendicular strokes. This looks to be a lot better. :)
But but, the wire brush is the only thing that can DEEP clean those grooves!
Except for, what I use, a sand blaster.
When it's REALLY dirty! Does it add any surface noise? ;)
Just don't use any of that "Scrubbing Bubbles". It cleans well but it will take your fingerprints right off!

Spinner45
long player
long player
United States of America
Posts: 2741
Joined: 01 Mar 2017 18:21

Re: Clearing a skip with a wet toothpick

Post by Spinner45 » 18 Jan 2019 06:22

wrote:
17 Jan 2019 22:50
Spinner45 wrote:
17 Jan 2019 22:42
wrote:
17 Jan 2019 22:03

From here on in I'm abandoning my using a wire brush with perpendicular strokes. This looks to be a lot better. :)
But but, the wire brush is the only thing that can DEEP clean those grooves!
Except for, what I use, a sand blaster.
When it's REALLY dirty! Does it add any surface noise? ;)
I can't really tell, the compressor motor on the sandblaster drowns out any noise from the record.

derspankster
long player
long player
United States of America
Posts: 1433
Joined: 25 Feb 2013 18:03
Location: Ohio

Re: Clearing a skip with a wet toothpick

Post by derspankster » 18 Jan 2019 14:30

Moving on. The wet toothpick technique really did work for me. Maybe I was lucky but I've only tried it that one time so far. If anyone gives it a go please share your experience.

crofk
long player
long player
United States of America
Posts: 1168
Joined: 07 Oct 2007 19:45
Location: Kansas

Re: Clearing a skip with a wet toothpick

Post by crofk » 18 Jan 2019 21:50

I’ve used it for years now. Really works pretty good with harming the record.

kc

derspankster
long player
long player
United States of America
Posts: 1433
Joined: 25 Feb 2013 18:03
Location: Ohio

Re: Clearing a skip with a wet toothpick

Post by derspankster » 18 Jan 2019 22:04

crofk wrote:
18 Jan 2019 21:50
I’ve used it for years now. Really works pretty good with harming the record.

kc
I wish I'd have heard about it years ago.

Post Reply