Pro-ject poll: What's your system?
-
- junior member
- Posts: 13
- Joined: 26 Jul 2015 01:25
Re: Pro-ject poll: What's your system?
Pro-ject RPM1 with a Ortofon 2M Blue
McIntosh MA-6500 integrated amp.
REL subwoofer
Monitor Audio GR20 speakers
Furman elite 15 PFi power conditioner
McIntosh MA-6500 integrated amp.
REL subwoofer
Monitor Audio GR20 speakers
Furman elite 15 PFi power conditioner
-
- senior member
- Posts: 336
- Joined: 03 May 2009 00:24
- Location: Dallas
Re: Pro-ject poll: What's your system?
The moment I saw this table, I bought it:
Pro_ject Xtension 9
Sumiko Bluepoint Special EVO III Cartridge
Primare A20 Phono Preamplifier
Emotiva USP-1 Preamplifier
Emotiva XPR-200 Amplifier
Emotiva CMX-6 AC Line filter
Mordant Short Aviano 6 Speakers
Pro_ject Xtension 9
Sumiko Bluepoint Special EVO III Cartridge
Primare A20 Phono Preamplifier
Emotiva USP-1 Preamplifier
Emotiva XPR-200 Amplifier
Emotiva CMX-6 AC Line filter
Mordant Short Aviano 6 Speakers
-
- junior member
- Posts: 8
- Joined: 13 Aug 2015 00:53
- Location: Cincinnati, OH
Re: Pro-ject poll: What's your system?
Hi All,
First post. Back to vinyl a week ago after 20 something years..
Pro-Ject Debut Carbon DC Ortofon Red
Emotiva XSP-1 Gen 2 Preamp
Emotiva XPA-2 Amplifier
Emotiva ERC-3 CD Player
B&W 603 S3 Speakers
2 Martin Logan Dynamo 300 powered Subs
First post. Back to vinyl a week ago after 20 something years..
Pro-Ject Debut Carbon DC Ortofon Red
Emotiva XSP-1 Gen 2 Preamp
Emotiva XPA-2 Amplifier
Emotiva ERC-3 CD Player
B&W 603 S3 Speakers
2 Martin Logan Dynamo 300 powered Subs
-
- junior member
- Posts: 8
- Joined: 20 Jul 2009 19:30
- Location: Scottville, MI, USA
Re: Pro-ject poll: What's your system?
My System Starts with a
ProJect RPM 1 Carbon TurnTable,MIT IC's replace the stock crap IC's.
ProJect SpeedBox S
Ortofon 2M Blue Cartridge :D
Music Hall Moo Mat =P~
PreAmp NAD C165BEE with outstanding Phono Section :!:
Harman/Kardon PA2200 Power Amp With all New Audio Grade Caps and Wiring.
Paradigm SE9 Mk3 Speakers/Carl's Speakers Made New Crossovers Audyn Caps,Mills Resistors,Hand Wound Coils.They Sound Incredible. Open Airy mids and highs,Tight Bass that's never Muddy. [-X
ProJect RPM 1 Carbon TurnTable,MIT IC's replace the stock crap IC's.
ProJect SpeedBox S
Ortofon 2M Blue Cartridge :D
Music Hall Moo Mat =P~
PreAmp NAD C165BEE with outstanding Phono Section :!:
Harman/Kardon PA2200 Power Amp With all New Audio Grade Caps and Wiring.
Paradigm SE9 Mk3 Speakers/Carl's Speakers Made New Crossovers Audyn Caps,Mills Resistors,Hand Wound Coils.They Sound Incredible. Open Airy mids and highs,Tight Bass that's never Muddy. [-X
Re: Pro-ject poll: What's your system?
Returning to Vinyl after a loooong time (used to listen via a Dual 701 back when I was a kid - the Dual is sadly broken but hopefully can be restored some day)...
My setup right now is:
- stock Debut III DC with OM5e (new model of the D3, basically a hybrid of the original one and the Debut Carbon DC)
- Rega Fono Mini preamp
- Yamaha RX-V459 AV receiver
- Philips Fidelio X2 headphones / Infinity Primus HCS speakers
Digital sources:
- Logitech Squeezebox touch
- Sansui CD Player (forgot the model number)
- LG BP-230 Blu-Ray player
Fortunately there's no hum on my turntable whatsoever - it does have the same improved motor suspension as the Carbon DC. :)
My setup right now is:
- stock Debut III DC with OM5e (new model of the D3, basically a hybrid of the original one and the Debut Carbon DC)
- Rega Fono Mini preamp
- Yamaha RX-V459 AV receiver
- Philips Fidelio X2 headphones / Infinity Primus HCS speakers
Digital sources:
- Logitech Squeezebox touch
- Sansui CD Player (forgot the model number)
- LG BP-230 Blu-Ray player
Fortunately there's no hum on my turntable whatsoever - it does have the same improved motor suspension as the Carbon DC. :)
-
- member
- Posts: 108
- Joined: 09 Jan 2013 20:50
- Location: Close to Toronto
Re: Pro-ject poll: What's your system?
Been a while since I posted last..
System has changed somewhat.
Pro-ject Xtension 10
Cadenza Red cart
K&K step up
Audionote L3 phono stage
Wyred4Sound DAC 1
Onix SP3 tube amp
Casta Acoustic Model A speakers
PSB Stratus Goldi's Speakers
McCormack DNA 500 amp
McCormack MAP 1 preamp
Nordost Red Dawn speaker cables
Running JRiver software controlled by iPad Air 2
System has changed somewhat.
Pro-ject Xtension 10
Cadenza Red cart
K&K step up
Audionote L3 phono stage
Wyred4Sound DAC 1
Onix SP3 tube amp
Casta Acoustic Model A speakers
PSB Stratus Goldi's Speakers
McCormack DNA 500 amp
McCormack MAP 1 preamp
Nordost Red Dawn speaker cables
Running JRiver software controlled by iPad Air 2
-
- junior member
- Posts: 7
- Joined: 30 Dec 2013 02:04
Re: Pro-ject poll: What's your system?
Very modest system for me: rpm 1 carbon with dl-110 and music hall cork mat, denon avr 2807 driving a pair of Polk audio tsi300, evergreen interconnects,generic stranded 16 guage 2 conductor cable for my speakers. Lots of room to grow here I know
-
- Posts: 3
- Joined: 31 Jan 2016 22:29
Re: Pro-ject poll: What's your system?
Xpression III w/ Ortofon 2m Blue
Phono Box USB
Yamaha RX-V775
Polk Rti-A3 (pair)
Polk CS-A4
Infinity PS-8 (pair)
Phono Box USB
Yamaha RX-V775
Polk Rti-A3 (pair)
Polk CS-A4
Infinity PS-8 (pair)
-
- Posts: 1
- Joined: 15 Feb 2016 00:50
Re: Pro-ject poll: What's your system?
Pro-ject Debut Carbon DC
Cambridge A1 MK2
JPW Monitor Speakers
Behringer PP400 Pre Amp
Cambridge A1 MK2
JPW Monitor Speakers
Behringer PP400 Pre Amp
-
- junior member
- Posts: 11
- Joined: 24 Feb 2016 00:25
Re: Pro-ject poll: What's your system?
In my signature :)
-
- junior member
- Posts: 10
- Joined: 18 Apr 2014 22:38
Re: Pro-ject poll: What's your system?
I'm in the process of putting together a system, folks.
So far it consists of the following:
Loudspeakers:Ascendo C8 Renaissance
Turntable: Pro-ject RPM 5.1se
Cartridge: Audio Technica at150mlx
Harmon Kardon 730 receiver (also used as phono stage)
Also: room treatments by GIK Acoustics
Logitech Squeezebox Duet/Dac in a Box/Samsung Galaxy Tab2 tablet
Below is a vid of the system. I'll have to upload a couple with the TT as source soon.
https://www.youtube.com/watch?v=f8paHe8qn1w
I look forward to viewing your insights; thanks!
So far it consists of the following:
Loudspeakers:Ascendo C8 Renaissance
Turntable: Pro-ject RPM 5.1se
Cartridge: Audio Technica at150mlx
Harmon Kardon 730 receiver (also used as phono stage)
Also: room treatments by GIK Acoustics
Logitech Squeezebox Duet/Dac in a Box/Samsung Galaxy Tab2 tablet
Below is a vid of the system. I'll have to upload a couple with the TT as source soon.
https://www.youtube.com/watch?v=f8paHe8qn1w
I look forward to viewing your insights; thanks!
-
- junior member
- Posts: 6
- Joined: 09 Oct 2015 14:29
Re: Pro-ject poll: What's your system?
Just up graded the system, Project Debut 2,above 13 years old. New Ortofon 20 stylus. Acrylic turntable. Warfdale 9.1 speakers plus rather old Pioneer speakers. Amplifier Cambridge Topax AM 10 . Might put a new pickup arm on? turntable belt has not been changed yet.ps just orderd new one
-
- member
- Posts: 27
- Joined: 13 Feb 2016 22:48
Re: Pro-ject poll: What's your system?
Pro-Ject 2Xperience SB
Sumiko BlackBird H.O.
Rogue Audio Cronus Magnum II
Squeezebox (pre-Logitech)
Rega Apollo
Spatial Audio M3 Turbo
Sumiko BlackBird H.O.
Rogue Audio Cronus Magnum II
Squeezebox (pre-Logitech)
Rega Apollo
Spatial Audio M3 Turbo
-
- junior member
- Posts: 8
- Joined: 10 Mar 2016 16:04
Re: Pro-ject poll: What's your system?
My system:
Pro-ject 6.9 turntable with carbon 9cc tonearm
Goldring eroica gx element
Trichord Dino phonostage with Dino+ powersuply
Lua appassionato mk3 cp player (psvane tubes)
NAT intregated single ended tube amp (psvane tubes 805 T)
Velodyne DD12+ subwoofer
powercables/cinchcables are the furutech powerflux
speakercable XLO-reference 5
vibex one rhodium powerblock
Pro-ject 6.9 turntable with carbon 9cc tonearm
Goldring eroica gx element
Trichord Dino phonostage with Dino+ powersuply
Lua appassionato mk3 cp player (psvane tubes)
NAT intregated single ended tube amp (psvane tubes 805 T)
Velodyne DD12+ subwoofer
powercables/cinchcables are the furutech powerflux
speakercable XLO-reference 5
vibex one rhodium powerblock
-
- junior member
- Posts: 13
- Joined: 30 Mar 2016 03:16
- Location: Minneapolis, MN
Re: Pro-ject poll: What's your system?
Second post, audio engineer, and analog lover...
Pro-Ject RPM 1 Carbon on 1/2" marble slab base, vibration damping under motor
Sumiko Pearl Cartridge (eyeing the Ortofon 2M Bronze)
Phono cable that came with the table (needs an upgrade, I know, advice welcome)
Bellari VP-130 Tube Phono Pre-Amp with NOS (1964) Philips ECC-83 MINIWATT tube
Balanced connection to a pair of Tannoy Reveal Active studio monitors
Happy listening!!
Pro-Ject RPM 1 Carbon on 1/2" marble slab base, vibration damping under motor
Sumiko Pearl Cartridge (eyeing the Ortofon 2M Bronze)
Phono cable that came with the table (needs an upgrade, I know, advice welcome)
Bellari VP-130 Tube Phono Pre-Amp with NOS (1964) Philips ECC-83 MINIWATT tube
Balanced connection to a pair of Tannoy Reveal Active studio monitors
Happy listening!!