Shure OT10E?

american simplicity
Post Reply
sschaef3
junior member
junior member
Posts: 13
Joined: 31 May 2018 20:58

Shure OT10E?

Post by sschaef3 » 31 May 2018 21:12

Hey all

A few years back I rebuilt my AR XA. From what I remember I had it up and running but ended up buying a modern table. I am now back to the AR XA and am reassessing it.

The cartridge is out and it appears to be a Shure OT10E. Will this cartridge work with the AR XA? I can't remember why I took it out or even if it was for this turntable

Thank you for your Help.

sschaef3
junior member
junior member
Posts: 13
Joined: 31 May 2018 20:58

Re: Shure OT10E?

Post by sschaef3 » 31 May 2018 21:19

Also, I just found a Denon DL110. Will either work on the AR XA?

Thanks

snfrosten
long player
long player
Posts: 1035
Joined: 23 Sep 2007 18:39
Location: NJ - USA

Re: Shure OT10E?

Post by snfrosten » 01 Jun 2018 02:33

Never heard of a Shure OT10E, if you could post a picture that may Help. The Denon will work but the arm needs to be set up and working 100% to get the best from the cartridge.

sschaef3
junior member
junior member
Posts: 13
Joined: 31 May 2018 20:58

Re: Shure OT10E?

Post by sschaef3 » 01 Jun 2018 13:11

snfrosten wrote:Never heard of a Shure OT10E, if you could post a picture that may Help.

Thanks for the response. Here is a photo of the Shure
Attachments
shure .jpg
(127.27 KiB) Downloaded 199 times

sschaef3
junior member
junior member
Posts: 13
Joined: 31 May 2018 20:58

Re: Shure OT10E?

Post by sschaef3 » 01 Jun 2018 13:14

snfrosten wrote:. The Denon will work but the arm needs to be set up and working 100% to get the best from the cartridge.
What cartridge can I buy that will work well with this arm?


Thanks

snfrosten
long player
long player
Posts: 1035
Joined: 23 Sep 2007 18:39
Location: NJ - USA

Re: Shure OT10E?

Post by snfrosten » 01 Jun 2018 15:17

Looks like a Shure N44 or N55 stylus, plenty of good generic replacements available on different sites. A Grado Black 2 would be a good alternative for a new cartridge.

Post Reply