Question about Planar 1 24v motor

on level ground
Post Reply
Shiwo
junior member
junior member
Posts: 8
Joined: 28 Sep 2017 21:32

Question about Planar 1 24v motor

Post by Shiwo » 17 Feb 2019 19:13

Hello, I acquired this former planar 1 24v motor to replace an old planar 2 110v motor and received it as shown on pics. I need some help to identify where do I solder the switch on the board. Same question for the ground which was cut off. Thanks!
Attachments
IMG_20190213_090159.jpg
Motor1
(90.34 KiB) Downloaded 70 times
IMG_20190213_090107.jpg
Motor2
(109.09 KiB) Downloaded 67 times
IMG_20190213_090036.jpg
Motor3
(119.84 KiB) Downloaded 65 times
IMG_20190213_090216.jpg
Motor4
(99.64 KiB) Downloaded 67 times

milw50717
member
member
Posts: 32
Joined: 21 Mar 2018 20:04
Location: USA

Re: Question about Planar 1 24v motor

Post by milw50717 » 18 Feb 2019 07:19

This may help. Be sure to download or view the images in a separate tab and expand to their full size.

From an auction on that well known site

https://i.ebayimg.com/images/g/ZzYAAOSw ... -l1600.jpg

https://i.ebayimg.com/images/g/iJcAAOSw ... -l1600.jpg

Post Reply