Garrard 301 template

the jewel in the crown
Post Reply
JonnyCJ
member
member
Posts: 39
Joined: 18 Feb 2012 21:12

Garrard 301 template

Post by JonnyCJ » 17 May 2012 18:27

Does anyone have a template in actual life size that I can have a copy of ?

I'm going to be building a slate plinth for my 301.

Whilst on, a 401 wouldn't go amiss :D

Happy to cover postage costs etc.

Thanks in advance

Jonny

d334578
member
member
Posts: 62
Joined: 12 Apr 2012 19:53

Re: Garrard 301 template

Post by d334578 » 18 May 2012 19:54

I think you might be able to download and print a template from this very website from the library. Not 100% sure, but I think they have one in there.

JonnyCJ
member
member
Posts: 39
Joined: 18 Feb 2012 21:12

Re: Garrard 301 template

Post by JonnyCJ » 09 Jun 2012 19:05

Managed to source a CAD template from a very helpful chap called Andy :-) This means that the plinth can now finally be made. I'm going to have an SME plinth as well as a one for my 12" Apparition tonearm.

Will post some piccies as things progress.

Paul89
junior member
junior member
Posts: 5
Joined: 01 Jul 2018 22:14

Re: Garrard 301 template

Post by Paul89 » 29 Oct 2019 19:41

Hi Jonny, I'm a new owner of my beloved 301 however I cannot seem to find a real life 1 to 1 scale template to build my own plinth. Can you please send me templates to make a layered plinth please.

Thank you very much!
Paul

Bozo73
junior member
junior member
Posts: 7
Joined: 29 Mar 2018 18:42

Re: Garrard 301 template

Post by Bozo73 » 30 Oct 2019 13:31

I have a 401 and bought a template off eBay, I tried to match the cuts with a router and discovered my ineptness. I then used the dimensions from the owners manual that provides center points for the radius of the cuts. It proved to be a more successful approach for my limited skills. Good luck.

Paul89
junior member
junior member
Posts: 5
Joined: 01 Jul 2018 22:14

Re: Garrard 301 template

Post by Paul89 » 30 Oct 2019 19:47

Thank you for your reply!

Post Reply