First of all, I would like to thank Conrad for this incredibly useful tool.
I am something of a novice at all this and I am sure I am about to ask a question which will sound foolish to many of you.
I have a Project Carbon Esprit turntable and I have upgraded the standard Red cart to a Blue and now to a Bronze. Obviously, this requires removal of the existing cart and I have done this and screwed in the Bronze cartridge. Using the template generator I have printed out the template and placed it on my platter. Now, here's the thing - how do I know in which position the template has to be placed on the platter? The instructions state do not attempt to point the spindle to pivot line at the pivot and that position will naturally occur as I try to trace the arc. Thing is the arc is traced accurately whatever position the cart is in in the head shell. Whether is pushed right back or as far forward as it can go, the arc is traced accurately. Therefore, I have no idea what position the cart should be located in the head shell as all position seem to trace the arc. Because all position seem to trace the arc I have positioned the template with the spindle to pivot line in line with the pivot and adjusted the cart based on that which results in it being as far forward as it will go.It sounds fine but is this right?
Any Help much appreciated!