the home of the turntable

Still getting inner groove distortion with pl12d

snap, crackle and pop

Still getting inner groove distortion with pl12d

Postby Iloveali » 23 May 2018 07:05

Hey now!
This is my 2nd thread. As apprentice as I am for all the previous responses, I still am getting inner groove distortion. Any other things to check on turntable? If read bearings could be an issue, I'm getting my at95e in mail Tommorow as just a way of a brand new cartridge test, maybe it will match my tonearm better. I'm just going absolutely crazy about this.
I work 12 hour shifts at a hospital so for 4 days straight I can do nothing but think about it.....

help
ANY AND ALL IDEAS
EVEN THE KITCHEN SINK ONES!!
Iloveali
junior member
junior member
 
Posts: 18
Joined: 12 May 2018 04:49

Re: Still getting inner groove distortion with pl12d

Postby Iloveali » 23 May 2018 08:26

When i ever so gently twist the tonearm between two fingers there is a slight move towards the right.... does this mean anything??? Or Maybe I'm not getting the alignment right?? If read that on s-shaped arms, you just square cartridge in headshell and use the pioneer overhang checker, wich I know is 49mm, and the s in the arm is supposed to be the cartridge angle
Iloveali
junior member
junior member
 
Posts: 18
Joined: 12 May 2018 04:49

Return to Turntables and Tonearms