AT331E

always listening
Post Reply
DLO
junior member
junior member
Posts: 15
Joined: 20 Apr 2009 16:55
Location: Russia

AT331E

Post by DLO » 14 May 2019 20:35

Hello everybody. I have oldschool Audio Technica at331e but have no specs for it (stylus force most needed) and years of manufacturing etc. Please share specs leaflet if anyone have this one. Thx in advance.

themisto462
senior member
senior member
Germany
Posts: 737
Joined: 10 Aug 2014 17:57
Location: Down on the corner...

Re: AT331E

Post by themisto462 » 15 May 2019 09:59

The specs can be found here, for example:

https://www.lpgear.com/product/AT331E.html

Regards.

DLO
junior member
junior member
Posts: 15
Joined: 20 Apr 2009 16:55
Location: Russia

Re: AT331E

Post by DLO » 15 May 2019 13:03

Hello, I saw it yet... Need to recheck. On LPGear confusing this one: Tracking force: 1.5 - 2.5 g (1.4 g standard). Why 1.4, not 2 grams? Thx in advance.

themisto462
senior member
senior member
Germany
Posts: 737
Joined: 10 Aug 2014 17:57
Location: Down on the corner...

Re: AT331E

Post by themisto462 » 16 May 2019 09:50

DLO wrote:
15 May 2019 13:03
Hello, I saw it yet... Need to recheck. On LPGear confusing this one: Tracking force: 1.5 - 2.5 g (1.4 g standard). Why 1.4, not 2 grams? Thx in advance.
That is bit weird indeed. But as the AT331E is based on the AT11E, I would orientate myself at the tracking force range of it, which is also 1.5 - 2.5 gram (optimum 2.0 gram).

DLO
junior member
junior member
Posts: 15
Joined: 20 Apr 2009 16:55
Location: Russia

Re: AT331E

Post by DLO » 17 May 2019 08:42

Hello, thanks for info - I think similar. What is the model 331E - its not available in catalogues. If you know - what's core difference between 11E and 331E?

themisto462
senior member
senior member
Germany
Posts: 737
Joined: 10 Aug 2014 17:57
Location: Down on the corner...

Re: AT331E

Post by themisto462 » 22 May 2019 11:21

In addition to the optical modernization (white body and a rounded front top edge), they may have changed the electrical specs a bit, but without measuring and comparison of the electrical values, it is just an assumption.

Regards.

Post Reply