Page 1 of 2

Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 08 May 2018 22:40
by bonzoro
Just had some Sansui F-6013 Driver boards manufactured. They turned out excellent. I plan on offering them bare with no components ($25 a pair) and fully populated ($100 a pair) keep in mind that there are $70 worth of NOS transistors on a pair of boards so....

They are going through testing right now.

You will have to use the F-6013 upgrade procedure Service Bulletin CE-037A for your receiver so they get hooked up correctly. I have a copy which I will supply with the boards. You must be versed in electronics or you will have problems installing.
IMG_4664 (2208 x 1656).jpg
(764.0599999999999 KiB) Downloaded 529 times

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 09 May 2018 03:38
by vinyl master
Thanks for offering those, bonzoro...I see a lot of these 5000 series amplifiers out there and it's not sure how many of them still have the old boards...I was fortunate in that my 5000a had the F-6013's installed...

31483

I really can't enough of it, either! Love everything about this series of receivers! 8)

31404
31401

While I don't need any, hopefully some of our members here can benefit from your boards, especially if they find one of these receivers in less-than-stellar condition...Keep up the good work! =D>

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 09 May 2018 03:49
by bonzoro
I have a 5000A (in pretty nice shape) and a set of the original F-6013 boards which I have not had time to install. I may put it up for sale with the originals. Maybe I'll throw in a set of new boards too....

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 09 May 2018 03:54
by vinyl master
If you do decide to sell the Sansui, sell it here in our Classified section...I know there a lot of newbies to the vinyl community that need a decent amp or receiver and the Sansui would make as good a start as any! Even a seasoned collector can appreciate this series...And really, when has Sansui ever made a BAD receiver??? :-k

From the 2000-5000 series to the 5050-9090 series to the G series to the 331-881 series to the AU- series of amps and more, they all have value and worth in my mind and are DEFINITELY NOT throwaway electronics, despite what my local Craigslist idiot wants us to believe!

40527

Too bad he's not as smart as WE are here! :wink:

We even have our own dedicated thread to the brand! =D>

https://www.vinylengine.com/turntable_f ... 85&t=79241

If you've got any of your own Sansui stuff to share, bonzoro, feel free to show it off there! :D

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 09 May 2018 04:00
by bonzoro
I can do that. I have been concentrating on my hand built Amplifiers/Preamp and have no time for the receivers.

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 15 May 2018 05:18
by bonzoro
I've been busy soldering. The last couple parts will be here tomorrow.


IMG_4676 (1457 x 1093).jpg
(565.09 KiB) Downloaded 427 times
IMG_4677 (1457 x 1093).jpg
(522.87 KiB) Downloaded 455 times

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 18 May 2018 23:26
by bonzoro
Boards are finished, I stuck a pair up on the bay to gauge interest. The price rose pretty quick. Must be a few 5000's out there needing them.

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 23 May 2018 23:09
by NAKDOC
I just purchased a pair. Very good quality!

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 23 May 2018 23:38
by bonzoro
Thanks Tom.

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 06 Jun 2018 23:56
by bonzoro
I have boards with original transistors, and boards with TO-220 transistors. It drops the price down with the TO-220 chips installed

The TO-220 boards are $99 shipped
IMG_4766 (2208 x 1656)rs.jpg
(932.3200000000001 KiB) Downloaded 333 times
IMG_4769 (2208 x 1656)rs.jpg
(822.87 KiB) Downloaded 347 times

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 02 Feb 2019 18:07
by jrockvideo
Hi, are these boards still available for sale?

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 02 Feb 2019 18:18
by bonzoro
I'll look to see if I have another set. Get back to you asap

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 02 Feb 2019 19:55
by bonzoro
jrockvideo wrote:
02 Feb 2019 18:07
Hi, are these boards still available for sale?
I have another set here ready to go. PM me

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 02 Feb 2019 23:00
by bonzoro
got 2 pairs left.

Re: Sansui 5000 5000A 5000x F-6013 Driver boards

Posted: 27 Mar 2019 20:08
by worthogg
Good Day Sir - Would you still happen to have a pair of these F-6013 driver boards available?