Ortofon RMG-309
16" Professional Tonearm
add a review
Description
The ultimate in tone arm efficiency and simplicity of design is expressed in the Ortofon RMG-309.
Precision ball bearing for both vertical and lateral pivots, finely polished, exert only the minimum of inertia.
The ball bearings, gimbal suspension, and base are made of fine Swedish alloys.
The Duralumin arm is rubber damped from the counterweight to reduce resonance to 8Hz - well below audibility.
The counterweight, which controls the stylus force, is spring controlled and can be set for a tracking force of 0 to 7 grams.
The extreme length of the RMG-309 accounts for the very small tracking error which is 0.83 degrees at maximum.
Complete with plug-in cables for ease of installation and elimination of ground loops and hum.
Any other manufactures cartridge may be installed in it's plug-in shell.
Specifications
Arm length (overall): 16"
Lateral length: 12"
Cartridge offset angle: 15.9 degrees
Tracking force: 0 to 7g
Arm resonance: 8Hz
Downloads
flyer 
- Terry Robinson
mounting instructions - sailinggorm
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Ortofon RMG-309 / RMG309 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Ortofon.