the home of the turntable

Library / Astatic

Astatic MF 200

Moving Flux Stereo Magnetic Cartridge

astatic mf 200 cartridge
astatic mf 200h cartridge
Astatic MF 200


The Astatic models MF 200 and MF 200H are designed to fit any universal type tonearm, specified by EIA standards.

The cartridges utilize a tiny magnet at the end of a stylus/cantilever tube.

Equipped with Shibata type parabolic stylus with 4X greater groove contact areas than any other type of stylus, tracking and compliance are enhanced significantly.

The suggested tracking pressure for these models is 1.75g +-0.25


Output voltage: 4.2mV

Channel balance: 1.5dB or less

Frequency response: 10-20,000Hz +-2dB

Channel separation: 23dB or more

Tracking force: 1.75g +-0.25g

Load impedance: 47kohms

Stylus tip: Parabolic (Shibata shape)


instruction/owners manual  English

H instruction/owners manual  English

Please login or register a free account in the forum to download files

If you have additional documentation please consider donating a copy to our free archive.

NOTE To view PDF files the latest version of the official acrobat reader is required.

Astatic MF 200 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Astatic.