the home of the turntable

Library / ADC

ADC 3001

Direct-Drive Turntable

review this turntable add a review

ADC 3001


The 3001 direct drive turntable is a completely manual turntable with the capability for mounting the ADC tonearms or other commercially available tonearms through the use of a universal type mounting hole.

The direct drive motor system is a DC brushless type, employing a Hall Effect Generator as a feedback speed control device.

The lab block laminated base is a solid block of high density Synergite milled out to accommodate drive, power and control systems.

Vibration isolation is provided through use of a mass-compliance system comprised of the turntable base and rubber isolator feet.


Variable pitch control: +-5% with strobe

Speeds: 33 and 45rpm (electronic speed change)

Build up time: within 2 seconds

Wow and flutter: less than 0.35% wrms

Rumble: better than -70dB

Platter: 305mm, 1.46kg, die-cast aluminium, dynamically balanced with rubber damping mat

Dimensions: 467 x 362 x 76mm

Weight: 10.35kg


instruction/owners manual  English

Please login or register a free account in the forum to download files

If you have additional documentation please consider donating a copy to our free archive.

NOTE To view PDF files the latest version of the official acrobat reader is required.

ADC 3001 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by ADC.