Hi marc6146. You have some reading and work to do. Find and read the thread "zero 100 auto flaw" on page 2 started by ernst and "garrard zero100's" on page 8 started by bob59. These two threads should get you started on fixing most everything to get your machine up and running. Then you need to ask specific questions. If you ask questions in those two threads along with the one you started it will bring them to the top again where they will be easy to access.
As far as static is concerned, it is probably something minor that can be dealt with after the auto flaw problems are fixed but fix those first. Remove the machine from its base, the cartridge and cartridge carrier along with the platter and lock the tonearm down and then read the threads I mentioned. Be careful of the tonearm wires as they are easily damaged. You will need to remove all the old grease from all parts and add new light oil to fix your machine. Follow the information contained in the threads I mentioned for guidance. Take a few pics before hand if you are afraid to remove parts.
With some reading, studying your machine and a bit of care it will all work out.
Also, add no oil to the cue portion of the machine as it will be ruined forever. Locate and study those cue parts on the underside of the machine and leave them alone.
Hope this helps, chan