About the Z2000b i have put pictures here. The problem with this one is that the guy who sended it had not tighten the transportscrews, so it was bouncing around in his box from the States to Belgium.
The speedselector was completely bent, i put it back right but now the shaft where the idlerwheel etc is mounted on is loosen now and i can't get any movement to tighten it up. The idlerwheel has a bad spot too, someone has not parked well the turntable, so you can hear the bumps...
The SL95 has only one fault: the nylon peace on the picture is moving sticky, i cleaned it up enand mounted it back, oiled it but keeps sticky, so the automatic is not working. Everything on this turntable is cleaned and relubed...
So if you have any suggestions, they are welcome as usual ...
Still looking good
The Idlerwheel of the Z2000, you can see the bump at 6.00
The opposite of the shaft.
The "stycky" nylon piece