arm base alignment michell syncro

a space odyssey
Post Reply
mr-malcontent
Posts: 3
Joined: 21 Feb 2004 13:59

arm base alignment michell syncro

Post by mr-malcontent » 22 Feb 2004 11:33

Just been cleaning up my deck with a view to selling it after buying a second hand rotel 855.

However whilst cleaning around the base of the arm, the assembly moved to the right. i moved it back as far as i could but now i am not sure whether its correct or not, as the arm base and alignment is not parallel to the platter. Is this correct? its about 10 degrees to the right.

On the black base of the assembly there are three scews with a allen key type adjustment, one of these as you know is near the straight section of the arm. This section overhangs the screw by about 1mm.

i must admit i had never ever noticed the base alignment but i want to make sure its okay before i put it up for sale on ebay. If it is wrong how do i adjust it? The whole assembly has tightened up now, after being a bit loose.

Post Reply