What Turntable do you use?

[davidsss]

It's a linear tracking arm.

DS

[megatrends]

It's a linear tracking arm.

DS

Obviously.

[youngdand]

It is the most accurate form of tone arm, as there is no distortion due to the angle the cart is at as it is always at the same angel. obviously manufacturing tollerances come in to play, but this is how the laquer is cut in the first place, so it should be closer if read this wa too.

[Lenco-dog]

Lenco 75. I restord it from a scruffy unit I got off ebay.

[radhe1486]

Heres mine My prized rockport turntable

[johnkercheval]

My Turnables

Postby johnkercheval » 12 Sep 2012 18:51
Hello:

1) Nakamichi CT (restored)- With VDH Frog

2) Yamaha PX-2 (restored) - VDH Frog

3) Sony PS-X800 (Restored)- Clearadio Cart

4) Pink Trinagle Anniversary- Ortofon Rohmann

Revox TT B791 not in service.

This is my collection. in order of importance. Prefer 80s TTs restored.

Reference system - tube- Jadis/Cabasse. The Nak is in this one.

Reference system (Solid state) - Krell the Sony & Yamaha are here.

[s1mp13m4n]

I own and use a Technics SL-5 linear tracking turntable. This is my first turntable purchase.

[Nick HGR]

[adesas99]

My turntable is probably the simplest, but here are some shots with my cameraphone. Still not a very good photographer.





Here's one without all the white balance:

[Mark E Smith's Dentist]

Technics SP10mk2 in two layer slate plinth with SME/Oracle 345 arm and van den Hul Frog cartridge. The other arm is a stock Rega RB250 with an Ortofon 530mk2 cartridge which is used for lesser records. The plan is to replace the RB250 with an R200 once I've had the output cable changed.

JT

[tapajeurs]

Thise one

[laalves]

Here's mine: SME 10 with SME V Gold arm, Ortofon Kontrapunkt b, feeding a TAG McLaren PPA20. The plinth is DIY: eight Foculpods with 1in. thick solid pinewood shelf on top, painted black (needs a couple more coats)

[duficity]

sony PS-x60 in main system so wife can use it with Sumiko Virtuoso DTi cartridge feeding into Manley Steelhead phono. Sota Cosmos IV in living room with Helius Omega arm and Dynavector Te Kiatora Rua cartridge into Quicksilver phono preamp. Oracle Delphi V SE with SME345 arm and Lyra Delos cartridge or Empire 208 with solid aluminum plinth and SME IV with Ortophon Kontrapunkt B into PS audio GCPH in den.

[SteC]

I have a Sony ps-X6 in my main deck (Just recapped it), with an ortofon OM-10 connected to a Pioneer SA-7500. I will update the OM-10 as it sounds somewhat aggressive on the bass.
In my secondary system, I have a Pioneer pl-516 with an audio technica element. This one I also recapped and relubed the motor, connected to a Pioneer SA-6500II.

In the mothballs, I have a Dual 1224 with the well-known "pin issue" and a Pioneer pl-518 awaiting new feet and a recap.