Dais turntable 1983 Newline Engineering

[evansd9]

I have an original Dais turntable circa 1983 made by Newline Eingineering . standard not heavy . Can anyone help with where I can get arm boards from . I have been a CD user now for 15 years and not had the Dais out of the cupboard . Use Naim equipment . Bought the Dais originally in preference to a Linn Sondeck back in 83 . Is it worth getting serviced and back in operation D

[nat]

It's worth seeing if it works perfectly well before worrying about servicing etc.

[satanfriendly]

Wasn't it the original TT by the late Tom Fletcher? If so it may be worth contacting Nottingham Analogue to see if they can still service the deck. They are usually very helpful over any past equipment.

I don't know how upto date this link is:

http://nottinghamanaloguestudio.com

Worth servicing? Of course. It was a well received table in its day. And a piece of history.

[markcass]

Wasn't it the original TT by the late Tom Fletcher? If so it may be worth contacting Nottingham Analogue to see if they can still service the deck. They are usually very helpful over any past equipment.

I don't know how upto date this link is:

http://nottinghamanaloguestudio.com

Worth servicing? Of course. It was a well received table in its day. And a piece of history.

The link is to the U.S. importer's site, unfortunately. NA don't have their own website.

Try: Nottingham Analogue Studio, 128 Cordy Lane, Underwood, Nottingham, NG165FD

44 (0) 1773 762947

HTH

Mark