B&W DM-6 or DM-5 Speaker Tweeter Needed

[Bob in STL]

I have a DM-6 that needs a tweeter.

Does anyone have a B&W tweeter part number TW20 for sale? they were in the DM-5 and DM6 models, they may have been in tother models too.

I also think that P/N TW26 will work (tweeter out of a DM 14) , could be the same tweeter ith a different mounting plate.

If you have one to sell let me know, you can PM me.

Cheers, Bob

[Alec124c41]

The TW 26 is larger and the output does not match.
I have a TW-20, the only loose one in captivity.
PM sent.

Cheers,
Alec

[Bob in STL]

The TW 26 is larger and the output does not match.
I have a TW-20, the only loose one in captivity.
PM sent.

Cheers,
Alec

You are the man.

PM sent.

Thank, Bob

[Alec124c41]

It's in the mail.

Cheers,
Alec

[Bob in STL]

It's in the mail.

Cheers,
Alec

Just so you guys know, Alec delivered a working part in a timely manner. He also provided me with a great advice and a tip to check the value of the fuses in the speakers. As it turns out they were the wrong value and dangerously too high.

My basement system is comprised of old "vintage" gear that I have picked in the past few months. It is sounding quite nice with the additon of these old classics.

They need a lot of cosmetic restoration but here they are, B&W DM 6's (aka Penquins):






They are presently connected to a Marantz 2270 receiver, a Kenwwod KD 550 direct drive turntable and a modern Denon DL 110 HOMC cartridge.



Thanks again Alec. Guys like you make this website a great place.

Cheers, Bob

[banerjba]

Nice pics!

All three on my systems use B&Ws from the early 1980s, mid 1990s and late 2000s.