| View previous topic :: View next topic |
| Author |
Message |
Alan Cheese
junior member
Joined: 24 Feb 2008
Posts: 3
Location: United Kingdom
|
Posted: Sun Feb 24, 2008 5:10 pm Post subject: Dual CS 455 Help needed |
 |
|
|
I have a Dual CS 455 with Dual DN251E cartridge.
Can anyone tell me correct tracking force and anti-skating setting for this cartridge?
Have a problem with auto start. If I try to use auto start the arm goes staight to the centre of the record, returns to the rest and switches off. Arm does not lower at any point.
Turntable works fine manually and arm returns to rest and switches off at end of record as it should do.
Anyone have any ideas on how to fix the auto start? |
|
| Back to top |
|
 |
lini
vinyl addict
Joined: 22 Sep 2007
Posts: 1636
Location: Munich/Germany

|
Posted: Mon Feb 25, 2008 2:38 pm Post subject: Re: Dual CS 455 Help needed |
 |
|
|
| Alan Cheese wrote: | I have a Dual CS 455 with Dual DN251E cartridge.
Can anyone tell me correct tracking force and anti-skating setting for this cartridge? (...) |
1.5 on both dials should have been the factory standard settings - then you can do further fine-tuning by ear/test record...
And, sorry, no idea on the autostart problem, 'cause I'm not familiar with the internals of the 455 and haven't found a service manual yet...
Greetings from Munich!
Manfred / lini |
|
| Back to top |
|
 |
Alan Cheese
junior member
Joined: 24 Feb 2008
Posts: 3
Location: United Kingdom
|
Posted: Mon Feb 25, 2008 6:22 pm Post subject: Thanks |
 |
|
|
Hi Manfred,
Thanks for your help. Thought it probably should be 1.5 and 1.5, but find that unless I set tracking weight to 1.75 to 2 and turn anti-skating down to zero, I am getting problems with stylus sticking in groove. I wonder if whole anti-skating setting mechanism could have slipped in some way?
Any help would be much appreciated, as I quite like the sound the turntable produces and it's very quiet. Would like a 750 or 5000, but can't afford one at the moment
Alan |
|
| Back to top |
|
 |
|