Ariston Q-Drive parts needed

Steelyjoe · Posted: Mon Nov 02, 2009 4:35 pm Post subject: Ariston Q-Drive parts needed

Hi,
I need 2 things
1. the countereweight and
2. the 12 vdc 350 mA adaptor.
If you have them or if you know where I can get them (or substitute) please let me know.
Thanks

satanfriendly · Posted: Mon Nov 02, 2009 6:33 pm Post subject:

The counterweight I can only but suggest you trawl E-Bay and see if anything turns up. They are pretty standard OEM Jelco arms and similar were used on other decks such as The Revolver and I think one or two AR decks. Alternative you could probably have one made easily enough if you know someone good with a lathe.

The power supply you should find off the shelf at the likes of Maplins or Radio Shack. Obviously just make sure the input connection is the correct item.

IMO Q-Decks are nice little decks when up and running
_________________
A sure cure for seasickness is to sit under a tree

Steelyjoe · Posted: Thu Nov 12, 2009 5:26 pm Post subject:

Thanks, Friendly
But I still need that couterweight.
Anybody???

FeiJi Fancier · Posted: Fri Nov 13, 2009 1:57 pm Post subject:

Ariston turntables (my Pro anyway) require a certain type of PSU. I use a 12V fixed voltage 400Ma regulated psu - Maplin's P/no. MG81C is printed on it [click]. Not bad for £11.

The wrong type of PSU simply won't work.