the home of the turntable

Library / Technics

Technics SH-10B7 obsidian plinth

Obsidian Plinth System

Designed for use with the SP10mkII and mk3 Turntables

Technics SH-10B7 obsidian plinth

Description

Heavyweight (17.3kg) plinth system made from cast, powdered obsidian.

Tonearms installable to the Technics SH-10B7 are limited by dimensions and configuration.

A tonearm with its rear part longer than shown in the manual cannot be used due to interference with the dust cover.

Tonearms with separate arm rests also cannot be used due to the difficulty in drilling a hole for the rest in the turntable base.

The maximum height of tonearms which can be used is 88mm from the arm mounting screws (this is the maximum height possible without the highest part of the tonearm touching the underside of the dust cover when closed).

Specifications

External dimensions: 561 x 175 x 466mm

Weight: 17.3kg (including dust cover, except for arm panel)

Downloads

instruction/owners manual  English


Please login or register a free account in the forum to download files


If you have additional documentation please consider donating a copy to our free archive.

NOTE To view PDF files the latest version of the official acrobat reader is required.

Technics SH-10B7 obsidian plinth / SH10B7 obsidian plinth owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Technics.