Stereo Phono Pre-Amplifier
The Shure M60 is a high quality, flat amplifier designed primarily to allow the phono cartridge to be used at a distance from the control amplifier.
The unit matches the impedance of the phono cartridge and has dual input and dual low impedance outputs so that up to 50 feet of cable can be used between the M60 and the main control centre with no noticeable deviation in the entire audio frequency response.
Gain: 17dB per channel
Frequency response: 30 to 80,000Hz
Input impedance: 47k ohms
Output impedances: 5,000 ohms
Hum and noise level: 64dB below rated output
Distortion: less than 0.14%
Channel separation: 30dB
Channel balance: +-1dB
Dimensions: 167 x 57 x 86mm
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Shure M60 / M-60 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Shure.