Two-Speed Belt Drive Automatic Turntable
The Sansui SR-2050C is a striking model strictly for the purist looking for the simplicity and accuracy of a manual turntable with the basic convenience of an automatic.
Incorporating two of Sansui's latest engineering breakthroughs - auto lift/stop mechanisms - the SR2050C substantially adds to the convenience of the manual turntable without sacrificing any of it's accuracy.
Like most automatics, the tonearm automatically lifts from the final groove of the record in play.
But unlike conventional automatics which take advantage of increasing end-of-play tonearm speed to trigger the lifting device, the auto-lift mechanism is entirely electrical and is set in motion by a special detector circuit which activates a relay/solenoid control system.
Type: 2-speed, belt-driven turntable with auto-lifter and auto-stop
Platter: 301mm, 1.2kg, die-cast aluminium alloy
Motor: 4-pole synchronous
Speeds: 33 and 45rpm
Signal to noise ratio: better than 40dB
Wow and flutter: less than 0.07%
Tonearm: static balance, tubular, inside force canceller, lateral balancer, direct readout stylus pressure scale
Arm length: 220mm
Cartridge: induced magnet type
Frequency response: 20-20,000Hz
Stylus pressure: 2g
Stylus: 0.5mil diamond
Dimensions: 190 x 442 x 352mm
service manual (en) - dennismiller55
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Sansui Belt Drive Turntables
Sansui SR-2050 / SR2050 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Sansui.