Sansui SR-2020
Two Speed Belt Drive Turntable
Description
Created on the assumption that even the finest stereo system is only as good as its weakest component, Sansui's SR-2020 has been built to the highest standards of precision to match our renowned line of receivers, speaker systems and headphone sets.
Designed especially for the listener with a fine ear and a tight budget, the SR-2020 incorporates an advanced belt-drive system and a double rim platter for a speed accuracy that puts it with the leading turntables in any price range.
It has a non-resonant, static balanced tubular tonearm with a tracking error of less than +-1 degrees, and a frequency response of 15 to 20,000Hz.
It also features Sansui's feather touch arm elevation mechanism that always lowers and lifts the tonearm at an even, steady speed.
There are more features to the SR-2020, many more, and combined they give you quality stereo sound reproduction that will compliment the finest of stereo systems.
Specifications
Platter: 12", 2.4lb, aluminium alloy die-cast, double rim
Motor: 4-pole synchronous capacitor starting motor
Speeds: 33 and 45rpm
Signal to noise ratio: better than 45dB
Wow and flutter: less than 0.1%
Tonearm: Statically balanced tubular tonearm
Tracking error: less than +-1 degrees
Stylus pressure: 0 to 2.g
Cartridge: induced magnet type
Frequency response: 15 to 20,000Hz
Output balance: less than 1.5dB
Channel separation: better than 30dB
Output voltage: 5mV
Load resistance: 50k ohms
Standard stylus pressure: 1.5 to 2g
Stylus: 0.5 mil spherical diamond
Dimensions: 20 1/2 x 14 2/3 x 7"
Weight: 17.6 lbs
Downloads
brochure (en)
Please login or register to download files
Sansui SR-2020 / SR2020 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are copyright the Vinyl Engine and provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Sansui.