the home of the turntable

Library / Rega

Rega RB700

Tonearm

review this tonearm (2 reviews)

Rega RB700

Description

The RB700 is the replacement for the RB600 and is fitted as standard to the P5 and P7 turntables.

The arm tube has a newly developed coating and the bearing housing has been redesigned and tolerances improved.

At the base of the arm there is a new bias adjuster similar to that on the RB1000 and a rigid stainless steel 3 point mounting block.

Specifications

Effective length: 237mm

Overhang: 15mm

Mounting distance: 222mm

Mounting hole: 23mm

Downloads

instruction/owners manual  English


Please login or register a free account in the forum to download files


If you have additional documentation please consider donating a copy to our free archive.

NOTE To view PDF files the latest version of the official acrobat reader is required.

Rega Tonearms

Rega RB700 / RB 700 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Rega.

Comments

liftarm adjustment

I replaced the elys cartridge with a sumiko blackbird and the liftarm wont lift the tonarm high enough. is there a way to adjust the lift arm to lift the tonarm higher?

VTA

Rega arms require the use of their 2mm shims to correct VTA height(s).