Dynamic Absorber Tonearm
The PA-5000 employs a long aluminium alloy pipe arm with an effective length of 250mm and this has triple the strength of conventional aluminium arms.
It is also very effective in countering the harmful partial resonance caused by bends in the arm pipe and twisting.
The arm pipe and the pipe holder incorporate a tough fixed chucking system which employs hexagon socket head screws. This system keeps the undesirable resonance to the minimum and assures stable tracking with light-tracking-force record play thanks to the high compliance cartridge.
A magnesium alloy which is not only lightweight but also displays sufficient rigidity and internal loss is used for the headshell in order to eliminate resonance.
This material reduces the adverse effects of the headshell's resonance and so the high compliance cartridge can perform to the absolute best of its ability.
Type: static balance, S-shaped universal arm
Support system: gimbal
Effective length: 250mm
Offset angle: 20.5 degrees
Tracking force range: 0 to 3g
Cartridge weight range: 4 to 7g (up to 12g with sub weight)
Arm pipe: rigid aluminium alloy
Headshell: 9g magnesium alloy
Arm mounting hole: 40.5mm
Accessory mechanisms: dynamic absorber, lever system anti-skating, silicon damped arm lifter
instruction/owners manual - nzvinyl
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Pioneer PA-5000 / PA5000 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Pioneer.