Ortofon T-10
Moving Coil Transformer
Description
The T-10 is a lower cost alternative to the T-20 and T-30.
It has been designed to match cartridges with an internal impedance of 2 to 4 ohm per channel.
The unit has a wide, flat frequency response and low phase shift.
There is essentially no distortion in the audible range, and wide band characteristics permit a good transient performance.
The T-10 output cables connect directly to the phono input sockets of the associated main amplifier.
Specifications
Type of unit: transformer
Pick up impedance: 2 to 4 ohm
Output loading: 47k ohm / 120pf
Frequency response: 20Hz to 45kHz
Phase linearity: +-18 degrees
Gain: 32dB
Channel balance: 0.2dB
Channel separation: 50dB
Transformer type: toroidal
Shielding: permalloy
Dimensions: 40 x 20 x 90mm
Downloads
instruction/owners manual (en)
Please login or register to download files
To view PDF files acrobat reader 8 or newer is required.
Ortofon T-10 / T10 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are copyright the Vinyl Engine and provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Ortofon.