Ortofon OM Pro
Integrated Magnetic Cartridge
The new OM Pro cartridge has been designed to withstand tough use in discos and radio stations.
It has a full playback cue facility, and to make life a lot easier, we've also cut out the nose of the cartridge and included a luminous tip.
The sound quality of the OM Pro is superb, and based on the low mass principle, the benefits are clear.
Low tip mass means very low surface noise and greatly improved tracking at high frequencies.
The result is lower distortion and far less record wear.
The Pro is also available in a Concorde version for use with tonearms with standard sockets.
Stylus type: spherical
Frequency response: 20 to 18,000Hz
Channel separation: 20dB
Channel balance: 2dB
Tracking force: 4.0g (3.0-5.0g)
Tracking angle: 20 degrees
FIM distortion: 1.5%
Load resistance: 47k ohm
Pro/Pro S spec sheet - jeroensky
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Ortofon OM Pro / OM owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Ortofon.