Micro Seiki Solid-5
2-Speed DC Servo Belt Drive Turntable with Static Balance Tonearm
Specifications
Drive system: DC servo belt drive system
Rotation: 33.33 and 45rpm
Platter 31cm diecast aluminium
Wow and flutter: less than 0.035%
Signal to noise ratio: more than 58dB
Tonearm: static balance type with inside force canceller
Effective length: 222mm
Overhang: 15mm
Offset angle: 21 degrees
Recommended cartridge weight: 4 to 11g
VTF range: 0-3g
Downloads
instruction/owners manual (en)
instruction/owners manual (jp) - somkiet
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Micro Seiki Belt Drive Turntables |
Micro Seiki Solid-5 / Solid Five owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Micro Seiki.
User Reviews
Looks very good, great tonearm, manual operation, etc but not a great TT.
Bought one for $20 in the original box with all extras including Sure M91ED at a thrift store.
.
So-So specs: rumble etc. See the manual.
Now here is the not so good part. When changing records the power is removed from the motor and the speed circuit is switched off. On restart the speed drifts. This occurs even when it has been adjusted on the proceeding record with little or no drift.
There are two micro switches one in the speed control circuit and the other in the power circuit.
I suspect the micro switch in the speed circuit has some internal resistance that changes slightly each time contact is made changing the total speed circuit resistance therefore the speed.
It's going on the repair table soon and I will update this review on the out come.
5/10 by gator.swamp
