Micro Seiki RX-1500
2-Speed Thread / Belt Drive Turntable (1982-90)
All Micro Seiki RX-1500 platter units feature a quadruplex suspension system.
This consists of coil spring, rubber diaphragm supported piston, compressed air and high viscosity oil.
These four components form an effective guard against vibration and microphonic feedback.
The RX-1500VG and RX-1500FVG use a vacuum suction pump.
A vacuum pump seals the record disc securely to the platter.
This not only corrects for warps in the record disc but more importantly, ensures positive contact between record disc and platter.
This contact reduces or mutes resonances and surface reflection in the system.
The RX-1500FVG benefits from the additional refinement of an air bearing system.
This system floats a heavy platter 0.03mm over the base.
This provides ideal platter rotation without mechanical friction in the direction of thrust.
Motor: DC servo motor
Speeds: 33.33 and 45rpm
Speed adjustment range: +-3%
Wow and flutter: 0.025% wrms
Signal to noise ratio: 75dB
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Micro Seiki Belt Drive Turntables
Micro Seiki RX-1500 / RX1500 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Micro Seiki.