Micro Seiki MR-611
2-Speed Belt Drive Turntable with Static Balance Tonearm
The Micro Seiki MR-611 is a two speed, belt driven turntable featuring a double rim platter and a push-button speed selector, located on the panel board.
The standard tonearm is fitted with a spring type, adjustable perfect anti-skating device, split and revolving type counter weight with direct reading stylus pressure ring and oil damped arm lifter.
Platter: 31cm cast aluminium alloy double rim
Motor: 8-pole hysteresis synchronous motor
Speeds: 2-speed 33.33 and 45rpm with push button selector
Wow and flutter: less than 0.05%
Signal to noise ratio: better than 52dB
Tonearm: static balance type tubular
Effective length: 237mm
Offset angle: 21 degrees
Cartridge range: 4 to 15g
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Micro Seiki Belt Drive Turntables
Micro Seiki MR-611 / MR611 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Micro Seiki.
9/10 by aputintsev58