the home of the turntable

Library / Lyra

Lyra Erodion

Stereo Moving-Coil Step-up Interface/Transformer

Lyra Erodion


Japanese built, with a frequency range of 10-100 kHz. Features a two position ground switch for grounding / floating ground.

The Erodian is especially designed for Lyra cartridges, but will also fit other low-impedance cartridges of 2-10ohms.

With a gain of 26db the Erodian has been designed to step the output of low output, low impedance MC cartridges up to a standard 10kohms - 47kohms MM phono inputs of preamplifiers and phono stages.

The unit will perform at its best if the interconnects between it and the phono stage are as short as possible.


Gain: 26dB (20x)

Load: 10k to 47k ohms

Usable MC phono cartridges: 2 to 10 ohms impedance

Frequency range: 10 to 100,000Hz

Feet: three stainless steel spikes

Dimensions: 150 x 115 x 65mm

Weight: 2430g


instruction/owners manual  English

Please login or register a free account in the forum to download files

If you have additional documentation please consider donating a copy to our free archive.

NOTE To view PDF files the latest version of the official acrobat reader is required.

Lyra Erodion owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Lyra.