Luxman PD 272
DC-Servo Direct-Drive Turntable (1980-1982)
The Luxman PD272 is a two-speed, manual turntable using a DC servo motor direct-drive system.
Slots are completely removed to eliminate unevenness of rotation caused by electromagnetics, and further provided is a turntable platter of high inertia with which the large mass of the platter weight is distributed around the outer contour.
For the tonearm, a straight type is adopted to eliminate resonance caused by lack of solidity which tends to be found on the tonearm exclusively designed for high-compliance type cartridges.
Driving method: direct-drive
Motor: DC servo brushless and slotless
Platter: 30cm aluminium die-cast 1.8kg
Speeds: 33.33 and 45rpm
Pitch control: +-4%
Signal to noise ratio: better than 60dB
Wow and flutter: no more than 0.03% WRMS
Tonearm: straight arm of static balance type
Effective length: 240mm
Cartridge weight: 4-11g
Stylus pressure: 0-3g (direct reading)
brochure - andy1921
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Luxman PD 272 / PD272 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Luxman.