Luxman PD 121
DC-Servo Direct Drive Turntable (1976-78)
Description
The Luxman PD121 is a two-speed, direct drive turntable with the following features:
Motor suspension
Heavy-weight turntable platter
Triple-structure insulator
DC-servo direct drive motor with electronic commutation
Bayonet mount tonearm base
Unique two colour stroboscope
Crystal clear acrylic cover
Simulated leather phono mat
Specifications
Driving system: direct-drive
Motor: brushless DC servo motor
Platter: 30cm aluminium die-cast 2.4kg
Speeds: 33.33 and 45rpm
Pitch control: +-4%
Signal to noise ratio: no less than 70dB
Wow and flutter: no more than 0.03% WRMS
Weight: 13kg
Downloads
instruction/owners manual (en)
service manual (en)
Please login or register to download files
To view PDF files acrobat reader 8 or newer is required.
Luxman PD 121 / PD121 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are copyright the Vinyl Engine and provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Luxman.
Comments
Luxman PD 121 truntable strobe
Submitted on March 1st, 2009 by amadeoavogadroBob Petroff
I was in the process of having a new arm put into my "old" Luxman when the tech informed me that the strobe no longer worked. He also informed me that he had no idea as to how to go about fixing the strobe. There did not seem to be anyway to get at it. Is there any help out there? Thanks
Luxman
Submitted on June 13th, 2009 by lpstineI have the same table. My strobe light did not work but when I lefted out the clear plasic cover I was able to access it and move it around. The cnnection may be dirty or loose. In my case just moving the bulb around resulted in it working. It is, as you know, hard to see it in a lighted situation. Hope this helps. Larry