Kiseki MCT-1S Improved
Silver Wired Moving-Coil Transformer
The sliver wired moving-coil transformer was the first product made by Mr Fokadu, being a special design for the low-impedance, low-output cartridge he was using himself.
This was the model MCT-1/MCT-1S, now available as the Kiseki MCT-1S Improved.
This is in fact the same design, however it has the possibility now to use it with low-impedance (around 5 ohms) moving-coil cartridges and also mid-impedance (around 40 ohms) cartridges.
The coils are winded on his special winding lathe and only the purest (99.99%) silver is used.
Each channel has it's own perfect screen against magnetic fields.
For best results a special aluminium/magnesium alloy has been used in the housing.
These transformers may be the best update for your current system.
Housing: tube out of aluminium/magnesium alloy
Colour: tube black anodised, front gold anodised
Contacts: gold plated cinch chassis parts
Input impedance: 5.3/42 ohms
Output impedance: 4000 ohms
Load resistance: 47K ohms
Frequency response: 10 to 200,000 Hz
Maximum input: 100mV
Crosstalk: better than 70db
Coil windings: pure silver
Weight: approx 500g
There are currently no downloads available for this model. If you have any documentation for the MCT-1S Improved please consider donating a copy to our free archive.
Kiseki MCT-1S Improved / MCT1 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Kiseki.