Two Speed Belt Drive Turntable (1998)
The Kenwood P-110 is a compact, 2-speed, belt driven turntable with integral tonearm.
Drive system: belt drive
Motor: DC motor
Platter: 185mm dia
Speeds: 33.33 and 45rpm
Wow and flutter: 0.1% WRMS
Tonearm: static balance straight tonearm
Effective length: 203mm
Cartridge: MM type
Stylus: N-69 with 0.6mil diamond
Frequency response: 20Hz to 20kHz
Output voltage: 2.5mV
Dimensions: 280 x 87 x 325mm
service manual (en) - nickocaudieus
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Kenwood Belt Drive Turntables
Kenwood P-110 / P110 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Kenwood.
Inexpensive entry level semi auto belt drive T/T with a reasonably good inbuilt switchable phono pre-amp so you can plug this straight into the aux input at line level. If space is at a premium and you are on a tight budget then IMHO this should be on your shortlist.
Unleash better performance by replacing the conical stylus with an elliptical one (any AT91 clone will fit) and you will not be disappointed. Discarding the small rubber mat and fitting a 12 inch acrylic mat really elevates the performance in many areas but don"™t expect limitless bass or an expansive soundstage. Careful citing is of vital importance as its plastic shell is vulnerable to resonance and the lid should always be removed during play. With a better stylus and acrylic mat it will see off many sub £150 turntables.
7/10 by Singlemania45