Grado Micro Control
Micro Control Pick-up Arm
The Grado Micro Control tonearm is constructed of the finest gunstock walnut wood and is hand rubbed to bring out the natural beauty of the wood grain.
The metal fittings are of finely machined anodized aluminium - it is precision crafted for maximum accuracy.
It's one piece construction eliminates the possibility of intermittent masses which cause instability and erratic resonances.
Those resonances cause a reduction of dynamic range and a loss of bass response.
The tonearm has four separate leads and a shielded cable and may be used for monaural or stereo playback.
Tracking error: +-8 degrees
Overhang adjustment: +-1/4"
Height adjustment: 1 1/4"
Stylus force adjustment: 7g
Arm length: lateral pivot to stylus 8 7/8"
Overall length: 14"
Offset angle: 24.5 degrees
Pivot friction: under 0.1g at stylus
The Micro Control tonearm is highly adaptable, easy to install and use, and handsome as well as functional.
Needless to say, it will work just as well with monophonic cartridges as with stereo cartridges - High Fidelity October 1958
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Grado Micro Control / Micro Control owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Grado.