the home of the turntable

Library / Goldring

Goldring G-910

Stereophonic Phono Cartridge

Goldring G-910

Description

The Goldring G-910/IGC is a lower compliance but otherwise identical version of the G-900/IGC.

It was conceived so that owners of higher mass tone arms could benefit from the audible improvements of the IGC stylus design.

In the G-910/IGC the stylus is mounted in a stiffer, less compliant cantilever assembly giving compatibility with high mass tone arms.

A further refinement is the modified bracket design which gives extra rigidity.

Specifications

Frequency response: 20Hz to 20 kHz

Channel balance: 2dB

Channel separation: 25dB

Sensitivity: 6.5mV

Equivalent tip mass: 0.45mg

Tracking angle: 24 degrees

Stylus tip: van den Hul

Load resistance: 47K ohms

Load capacitance: 150 to 200 pF

Internal impedance: 570 mH

Cartridge weight: 4.25g

Tracking weight: 1.0 to 2.5g

Replacement stylus: D160/IGC

Downloads

instruction/owners manual  English


Please login or register a free account in the forum to download files


If you have additional documentation please consider donating a copy to our free archive.

NOTE To view PDF files the latest version of the official acrobat reader is required.

Goldring Phono Cartridges

Goldring G-910 / G910 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Goldring.