Goldring Lenco model 600
Variable Reluctance High Fidelity Pick-Up Cartridge
The Goldring 600 is designed to give the highest quality of reproduction from transcription, standard and microgroove records.
The two styli are located on opposite sides of the cartridge case, one being intended for use on 78rpm records and the other on microgroove records, and a simple mounting mechanism enables the cartridge to be rotated through 180 degrees in order to bring the correct stylus in position on the record.
The model 600 is the first British variable reluctance cartridge designed specifically around a diamond stylus.
This results in a considerably reduced dynamic mass because there is no necessity to provide for stylus replacement.
To match the phenomenally low dynamic mass the compliance has been substantially increased resulting in a flat frequency response from 20 to 20,000 cycles per second.
Type: magnetic variable reluctance turn over cartridge
Styli: 0.0025" sapphire (78rpm), 0.001" diamond (microgroove)
Tracking pressure: 7g
Effective tip mass: 2mg
Load resistance: 68 Kohms
Frequency response: 20Hz to 21kHz
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Goldring Lenco Phono Cartridges
Goldring Lenco model 600 / 600 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Goldring Lenco.