Goldring Lenco G-910
Stereophonic Phono Cartridge
The Goldring G-910/IGC is a lower compliance but otherwise identical version of the G-900/IGC.
It was conceived so that owners of higher mass tone arms could benefit from the audible improvements of the IGC stylus design.
In the G-910/IGC the stylus is mounted in a stiffer, less compliant cantilever assembly giving compatibility with high mass tone arms.
A further refinement is the modified bracket design which gives extra rigidity.
Frequency response: 20Hz to 20 kHz
Channel balance: 2dB
Channel separation: 25dB
Equivalent tip mass: 0.45mg
Tracking angle: 24 degrees
Stylus tip: van den Hul
Load resistance: 47K ohms
Load capacitance: 150 to 200 pF
Internal impedance: 570 mH
Cartridge weight: 4.25g
Tracking weight: 1.0 to 2.5g
Replacement stylus: D160/IGC
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Goldring Lenco Phono Cartridges
Goldring Lenco G-910 / G910 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Goldring Lenco.