Eminent Technology ET2
Air-Bearing Straight-Line Tracking Tonearm
The model two is an air bearing, straight line tracking tonearm for precise reproduction of analogue records.
It is uniquely conceived tonearm, designed to be installed on turntables with universal mounts. It can be adapted to both solid mount (direct drive) turntables and spring suspended turntables.
It's flexibility in many cases allows it to be mounted on many decks without the need for special hardware.
Length: 7 3/8" pivot to stylus
Tracking error: 0 degrees
Effective mass: 25-35g horizontal, 7g vertical
Height adjustment at pivot: +- 2 degrees vertical angle
Overhang adjustment: slot with 1/2" range
Resonance damping: tonearm tube and spindle are filled with closed cell foam
Maximum cartridge weight: 15g
Maximum tracking force: 7g
Pivot damping: none for vertical, horizontal damping by counterweight
Azimuth adjustment: +- 2 degrees
Spindle weight: 14g
Tonearm tube weight: 11g
Overall tonearm weight: 405g
It did not take very long to discover that the ET2 was one of the world's finest-sounding tonearms.
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Eminent Technology ET2 / ET 2 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Eminent Technology.