Dynamic Damping S-Shaped Tonearm
The DA-307 features a dynamic damping mechanism to damp peculiar vibrations of various arm parts and low frequency vibration.
The root of the tonearm pipe is divided into two parts and the damper rubber of a proper viscosity and elasticity is put in between.
Further, the tonearm is of such a one-point supporting type that the arm pipe is pulled by suspension wire at a tension strength adjusted properly. It is the same construction as employed at the cantilever supporting mechanism of most Denon cartridge series such as the DL-103.
By use of this mechanism, the tonearm effectively damps the vibrations conducted from the arm base as described above and enormously reduces the peculiar vibrations of various components of the arm.
Type: dynamically balanced, static balance type
Overall length: 332mm
Effective length: 244mm
Height adjustment: 42 to 70mm
Stylus pressure: 0.1g sub scaled vernier type dial
Cartridge weight range: 5 to 10g
Headshell: 6g PCL-5 magnesium alloy diecast
The DA-307 when combined with the DP-6000 turntable, AU-230 transformer and DL-103D cartridge is an excellent, albeit expensive combination, and can be highly recommended - Edward M Long
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Denon DA-307 / DA307 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Denon.