Medium/High-Mass Uni-Pivot Tonearm
polished titanium arm tube
The arm tube is a single piece design that is locked into the pivot tower with air-free seal bonding agents to guarantee perfect coupling.
The detachable headshell has a conical pin to avoid any play once mounted on the arm tube and the cartridge mounting surface is machined to ensure azimuth accuracy.
The pivot tower is a special bell shape with rounded edges to improve stability and eliminate mistracking. At the top of the rounded end there is a bronze screw to adjust vertical tracking angle.
The counterweight consists of 4 cylindrical weights made from polished brass and allows the use of any kind of cartridge.
Cables used in the tonearm are of hyper-litz type in copper and silver, with the external cable being pure silver with Teflon insulation.
Mounting, as with other Bluenote Tonearms is Rega pattern.
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
Bluenote Bellaria owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction without prior permission or for financial gain is strictly prohibited. This website is not affiliated with or sponsored by Bluenote.