ADC Accutrac 4000
Two Speed Direct Drive Turntable
Description
The Accutrac 4000 is a direct-drive turntable with automatic track selection and a computerized memory bank
Specifications
Type: two-speed direct drive
Motor drive system: low speed electronically controlled dc brushless motor
Speeds: 33 and 45rpm
Build up time: within 2 seconds to full speed
Variable pitch controls: 5%
Platter: 306.4mm, 1.4kg, die cast aluminium alloy, dynamically balanced
Wow and flutter: less than 0.03% wrms
Rumble: better than 70dB
Tonearm: tubular s-shaped, statically balanced arm, direct readout
Effective length: 237mm
Overhang: 15mm
Offset angle: 21 degrees
Arm tracking force range: 0 to 4g
Cartridge: ADC LMA-1 low mass induced magnet
Output: 3.5mV
Cartridge tracking force range: 0.75 to 1.5g
Frequency response: 10Hz to 24kHz
Channel separation: 28dB
Load resistance: 47K ohms
Stylus tip: nude 0.0003 x 0.0007" elliptical diamond
Dimensions: 470 x 441 x 152mm
Weight: 9kg
Downloads
instruction/owners manual (en)
Please login or register a free account in the forum to download files
If you have additional documentation please consider donating a copy to our free archive.
NOTE To view PDF files the latest version of the official acrobat reader is required.
ADC Direct Drive Turntables |
ADC Accutrac 4000 / 4000 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other inaccuracies. The PDF files are provided under strict licence. Reproduction for financial gain is strictly prohibited. This website is not affiliated with or sponsored by ADC.
